Cicada 33A 4-in-1 ESC with 12v/5v BEC
Clean up your build with this monster 33A 4 in 1 ESC. Get your ESCs off the arms where they can easily get damaged. The Cicada 4-in-1 33A measures 36x36mm with 30.5 x 30.5mm mounting holes like the flight controllers. Clean up all the messy wires and build with this stack. Runs on the latest BLHeli-S firmware so it's Dshot compatible. BLHeli_S firmware is the next generation code, following the base BLHeli code.
1. BLHeli_S is designed for superior performance in multirotors, and uses hardware generated motor pwm for smooth throttle response and silent operation.
2. All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
3. The code supports features to prevent sync loss. There are tuneable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.
4. The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multshot (5- 25us), and DShot600. The input signal is automatically detected by the ESC upon power up.
Constant Current: 33A
Max Current: 43A
BEC 2 3A/12V
Input: 2 to 5s LiPo