Additional Information

Additional Information

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...

ES-121 Motion Control Electric Screwdriver Repair Tool FPV Racing


ES-121 Motion Control Electric Screwdriver Repair Tool FPV Racing


Out of Stock


Product Description

Package includes: 
1 x ES121 Mini Motion Control Electric Screwdriver 
1 x SL2.0 Straight Screwdriver Bit
1 x PH00 Hex Screwdriver Bit
1 x ES-B7 Screwdriver Bits Set
1 x ES-A7 Screwdriver Bits Set
Gearbox: 1:64 Integrated planetary gearbox
No-load Speed: About 380rpm
Maximum Electronic Torque:

ES120 upgraded version is coming. It is equipped with 1:64 reduction gear motor(ES120 is 1:144) ensure larger rotation speed up to 380 RPM load-free(ES120 is 170RPM) .Slim 304 stainless steel housing with pen shape design,powered by 300mAh lipo battery with 30 minutes working time continuously at full load. It is equipped with SMT32 MCU and 3-axis gyro supporting motion control enable the user to screw or unscrew just by a thumb slight moment, so intelligent and convenient. 16X96mm OLED display the working status and standard 4mm diameter socket compatible most most precision screwdriver bits.Come alone with 14pcs orgingal screwdriver bits includes PH0,PH2,SL1.5,SL3.0,SL4.0,H1.5,H.0(ES-B7 common type),PH000,T4,T6,T8,T10,P2,P5(ES-A7 type)and portable pouch easy to store and carry, a great helper for electronic reparing projects.
Smart Functions:
-Battery low voltage reminder, low voltage protection mode;
-User ustomized configuration parameters (such as torsion, torque, etc);
-Open source application layer.
Parameter Setting:
1/ Press the button 3 times to enter the "setting", Wait without any action or long press to ture off "setting".
2/ A model is automatic 

3/ 1-4 model corresponds to 4 kinds of torque, and torque decreases progressively.

Configuration file settings:
When the screwdriver is turned off, connect it with USB data cable to your PC ro laptop, then press the button, then the computer will recognize it. Open the config.txt file in the U disk,
the content is:
StartAngle=2 #(2~10)
Gear=4 #(0~4)
MotoTimeCont=0 #ReadOnly
Ver=1.1 #ReadOnly

Then you can change your setting.

Performance Parameters Hardware Parameters
Operation Voltage 3-5V Body Material 304 Stainless steel(Silver)/Copper alloy(Grey)
No-load Speed About 380rpm Screen 16*96 OLED
Electronic Torque  
300mAh 10440 Lithium-ion battery
Torque (manual mode) Rotor Bidirectional overrunning clutch
Screwdriver Bit 4M hexagon Gearbox 1:64 Integrated planetary gearbox
Charging Time 45min Motor 25,000 rpm brush motor
Running Time 30min (full power) Main Chip STM32
Charging Mode Micro USB 5V Input Sensor Angular velocity sensor

Product Reviews

Find Similar Products by Category