Additional Information

Additional Information

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...

Happymodel Cine8 DIY 85mm 3S Crazybee F4 V3.1 12A ESC Brushless CineWhoop FPV Racing Drone BNF w/ 5.8G 40CH 400mW VTX Caddx ANT 1200TVL Camera

$109.00

Happymodel Cine8 DIY 85mm 3S Crazybee F4 V3.1 12A ESC Brushless CineWhoop FPV Racing Drone BNF w/ 5.8G 40CH 400mW VTX Caddx ANT 1200TVL Camera

$109.00
SKU:
Happymodel-Cine8
Quantity:
Share

Product Description

 

Notice:

It is DIY FPV Racing Drone.

You need assemble all parts by yourself.

 

Introduction:

This Kit is very easy to build , no solder work any more, just assemble then plug and play .  

Very cheap but equipped with high-performance and stable components.

The frame is formed by high-precision TPU 3D printing, fixed with carbon fiber board and the use of integral foam to prevent collision.

Every one could enjoy the fun of building their own FPV Cinewhoop.

 

Specification:

Brand Name: Happymodel
Model: Cine8
Item Name: DIY 85mm F4 3S Brushless CineWhoop FPV Racing Drone BNF
Wheelbase: 85mm
Size: 145x140x23mm
Weight: 73g (without battery)
Weight: 99g (with Insta360, NOT Included in package)

 

EX1202.5 8000KV Motor

Model: EX1202.5

Item Name: 1202.5 8000KV 2-3 Brushless Motor

No.of Cells: 2-3S Lipo

Configu-ration:9N12P
Stator Diamter:12mm
Stator Length:2.5mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len): Φ14x14.5mm
Weight: 4.4g

Gemfan D51 2020 4-Blade Propeller

Material:PC

Weight:0.91g

Pitch:2in

Props Dia:50.3mm

Center Thickness:4.5mm

Center Hole Dia:1.5mm 3 holes

CRAZYBEE F4 V3.1 Flight Controller

Frsky SPI RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR

(External Flysky Fli14+ RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR

(External Speki+ RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR

(External TBS CRSF NANO version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board Size: 28.5x28.5mm
Power Supply: 2-4S Battery input (DC 7V-17V)
Built-in Betaflight OSD(SPI Control)
Built-in 5V 1A BEC

Onboard 12A 4in1 ESC

MCU Upgraded to EFM8BB21
Power Supply: 2-4S LiPo/LiPo HV (7v/17v)
Con. Current: 12A

Burst Current: 15A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: F_H_40_REV16_8.HEX
Default protocol: DSHOT600

Onboard Frsky SPI D8 Receiver Version

CC2500 Hardware

Compatible with FrskyD FrskyX Frsky_X_LBT SFHSS REDPINE protocol

Channels: 8ch
Failsafe support

Diversity 2.4G receiver system
No ground interference: above 300meter

   
   
   

5.8G 40CH 400mw VTX

Output power: 25mw~400mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 400mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race band 

SmartAudio ready

Caddx ANT 1200TVL Camera

Image Sensor: 1/3" CMOS Sensor

Horizontal Resolution: 1200 TVL

TV System: NTSC or PAL 

IMAGE: 16:9 or 4:3

Synchronization: Internal

Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000

S/N Ratio : >52dB (AGC OFF)

Video Output: CVBS

Lens: 1.8mm

Min. Illumination: 0.001Lux@F1.2

Auto Gain Control: YES

BLC: YES

WDR: Global WDR

DNR: 3D DNR

Dimensions: 14*14mm(with bracket to 19*19mm)

Wide Power Input: DC 3.7-18V

Work Temperature: -20℃~+60℃

Weight: 2g (N.W.)

 

Lipo Battery Tattu 3S 11.4V 450mAh Lipo Battery

 

Features:

- No Solder work need and easy to build

- Very reliable and resistant to drops

- Stable and smooth flying

- Insta360 fixed mount ready ( insta360 camera not included)

- Smooth and powerful

 

Includes:

1x Cine8 85mm Frame

1x Optional Receiver

4x EX1202.5 8000KV Motor

2x Gemfan D51 2020 4-Blade Propeller CW

2x Gemfan D51 2020 4-Blade Propeller CCW

1x Caddx ANT 1200TVL Camera

1x 5.8G 400mW VTX

1x TypeC USB Adapter

Product Reviews

Find Similar Products by Category